
Orders & Trade Management: Order Status, Modifying Orders & Managing Positions
Learn what happens after you submit a commodity order on SAHI: read order status, handle partial fills, modify or cancel pending orders, adjust Stop Loss and Take Profit, and manage futures and option positions.

Placing an order does not always mean you are in the trade.
A Limit order may still be waiting for price to reach it, a Trigger order may not have activated, part of the quantity may have executed while the rest remains pending, or the order may have been rejected altogether. Once a position is open, another set of decisions begins around the Stop Loss, target, open P&L and eventually the exit.
This is where order functionality turns into trade management. The objective is not to keep changing a trade every time the market moves. It is to understand what has happened to the order, what SAHI allows you to do next and whether any change still fits the trade you intended to take.
Start With The Order Status
After an order is submitted, the first thing to check is its status.
A Pending order has been accepted but has not yet fully executed. It may simply be waiting for the required price or trigger condition. An Executed order has been filled, although the quantity may sometimes be filled in parts rather than all at once. A Rejected order has not been accepted or processed, while a Cancelled order will no longer execute any remaining quantity.
The distinction matters because a pending order and an open position are not the same thing. Suppose you place a Limit order to sell Gold Mini at a particular price while the market is still trading below it. Until that order executes, you do not yet have the Futures position you were trying to create.
The same becomes important with a partial fill. If only part of the quantity executes and you cancel the rest, the quantity that has already been filled remains an open position. Cancelling what is still pending does not reverse what has already happened.
So before modifying, cancelling or placing another order, check what actually happened to the first one.
When A Pending Order No Longer Makes Sense
Waiting for an entry is part of trading. Chasing one does not have to be.
Suppose you wanted to sell only after Gold reached a particular resistance area, so you placed an order and waited. If the market remains below that level and the setup is still intact, there may be no reason to change anything.
But the market can change before the order fills. Perhaps price breaks through the level that made the original setup attractive, or the wider structure changes enough that you no longer want the trade. In that case, the pending order can become irrelevant before it ever becomes a position.
This is where Modify and Cancel become useful. A pending order can be changed if the new entry still makes sense, or cancelled if the trade itself no longer does.
What you want to avoid is moving an order closer to the market simply because waiting has become irritating. An entry at a different price can change the risk/reward, the distance to the Stop Loss and sometimes the entire reason for taking the trade.
Modification should therefore begin with the trade, not with the urge to get filled.
The Order Type Should Match What You Want The Market To Do
Market, Limit and Trigger orders become easier to understand when they are tied to a situation rather than memorised as platform features.
If you have decided to enter immediately and are willing to accept the available market price, a Market order prioritises execution. If you only want to trade at a particular price or better, a Limit order gives you that price condition. If the trade should activate only after the market reaches a particular level, a Trigger order allows you to wait for that condition.
The same logic continues after the order is placed. A Limit order may remain pending because the market never reaches your price. A Trigger order may remain inactive because its condition has not occurred. Neither situation automatically requires intervention.
What matters is whether the order is still doing the job you originally gave it.
Changing The Entry, Stop Loss Or Take Profit
SAHI also allows eligible trade levels to be adjusted directly from the chart, where that functionality is available. Instead of entering a fresh number manually, an entry, Stop Loss or Take Profit line can be moved to a new level on the chart.
That convenience is useful when the trade itself gives you a reason to make the change.
Suppose a Futures position has moved sharply in your favour and your trade plan allows the Stop Loss to be tightened after a certain move. You may decide to bring the stop closer to the market and reduce the amount of profit that can be given back. The same can apply to a target if new market information changes the area where you want to exit.
The opposite decision needs more care. If price is approaching your Stop Loss and you move the stop farther away simply because you do not want the trade to close, you have increased the loss the position is allowed to take. The number on the chart may have changed in a few seconds, but the risk you accepted before entering has changed with it.
Any modification should therefore be followed by another check. Make sure the new level has actually been accepted by SAHI and that the order or position now reflects what you intended.
Managing An Open Futures Position
Once a Futures order has executed, the entry decision is over. The position now has to be managed against the plan that justified it.
The position screen should allow you to confirm the contract, direction, open quantity and average execution price while also showing how the position is performing.
Suppose the trade begins moving towards the target. A favourable move does not automatically require you to change anything; the original exit plan may still be perfectly valid. If your rules allow a Stop Loss to be tightened after a sufficiently strong move, that can also become part of the management process.
If price moves towards the Stop Loss instead, the temptation often runs in the other direction. Moving the stop farther away may keep the position alive, but it also means accepting more risk than the trade originally allowed.
There is also a third possibility: the market does very little. A position can remain stuck between the entry, stop and target without giving either side what it wants. If the original trade included a time-based exit or another condition for abandoning a stagnant setup, that rule can become relevant here.
The open P&L on SAHI helps you see how the position is performing while all of this is happening, but it should not become the trade plan by itself. A temporary profit can shrink and a temporary loss can change as the market moves. We will deal properly with unrealised P&L, realised P&L and mark-to-market in the next chapter.
SAHI’s P&L Protect lets a trader set portfolio-level profit and loss limits in advance, so the exit rule exists before the position starts moving. A Kill Switch can also block new trading for a chosen period; it does not close open positions.
Exiting The Futures Position
A Futures position does not have to remain open until either the Stop Loss or target is reached. If the setup is invalidated or you otherwise decide to exit according to the plan, the position can be closed manually from SAHI.
Closing the position means taking the opposite side in the same contract. A long Futures position is closed by selling the required quantity, while a short Futures position is closed by buying it back.
The quantity matters here as much as it did at entry. If you close only part of the open quantity, the remainder continues as an open position. Before confirming the exit, check the contract and the quantity you are actually closing.
What happens to the P&L and margin once that exit executes belongs to the trade lifecycle we will cover in Chapter 19.
An Option Needs One More Thing To Watch
Managing a purchased Option introduces another moving part because the Option premium does not simply copy the underlying commodity point for point.
Suppose you bought a Gold Put because you expected Gold to fall. If Gold moves lower, the Put premium may rise, but the size of that move depends on the Option itself and the conditions around it. If Gold barely moves, the premium can still change as time passes or volatility changes. And if Gold rises against the bearish view, the Put may lose value.
That means the Gold chart remains important, but it is no longer the only screen worth watching. The Option contract has its own premium, quantity and open P&L, and those numbers tell you what is happening to the position you actually own.
How you exit depends on the plan. Some traders may use a level on the underlying commodity as the point at which the view becomes invalid. Others may use a premium-based Stop Loss or Take Profit, while a time-based exit can also matter when an Option is not behaving as expected.
The important thing is to know which rule you are following. A Stop Loss based on the Gold price and one based on the Put premium are not the same instruction, even when they belong to the same market view.
Expiry adds another layer to this, particularly because Options change as time runs out. We will deal with that separately in Chapter 19.
Before You Change The Trade
Most of the controls in this chapter are easy to use. Deciding when to use them is the harder part.
A pending order may genuinely need to be cancelled because the setup has disappeared. A Stop Loss may be tightened after a strong favourable move because that is part of the plan. An open position may need to be closed because the original market view has been invalidated.
But changing an entry because you are tired of waiting, moving a stop because you dislike the loss on screen, or taking profit simply because the P&L has turned green are different decisions.
Before modifying anything, check whether the setup has actually changed, whether the action is consistent with the exit plan and whether it changes the amount of risk you originally accepted.
Sometimes that leads to a modification. Sometimes it leads to an exit or a cancellation. Quite often, the right management decision is to leave the trade alone.
The next chapter looks at what is happening underneath all of this once a position is open, including unrealised and realised P&L, margin, mark-to-market, expiry and settlement.
Key Takeaways
- Submitting an order does not necessarily mean the trade has executed, so check its actual status before taking the next step.
- A pending order can be modified or cancelled if the original setup changes, while cancelling an unfilled remainder does not reverse quantity that has already executed.
- Market, Limit and Trigger orders solve different execution problems, so the order type should match what you want the market to do.
- An open Futures position should be managed against its predefined stop, target and exit rules rather than the changing P&L alone.
- An Option position requires you to monitor the Option premium as well as the underlying commodity because the two do not necessarily move point for point.
Test yourself
Five quick questions on Chapter 18: Orders & Trade Management
Commodity knowledge check
How well do you understand commodity markets?
Answer all five questions to check what you have picked up from this chapter. Each answer comes with a short explanation.