
Putting It All Together: Four Commodity Trade Case Studies on Sahi
Bring the whole course together through four cases: a Gold futures setup, a Crude Oil call around an OPEC+ meeting, the same Gold view through futures or a put, and a move that is better left alone.

A trade is more than a market view. You can be bearish on Gold or bullish on Crude and still have a poor trade if the entry is wrong, the position is too large, the contract does not fit the view or the risk simply is not worth taking.
The real work is bringing all of those decisions together. You need the market view, the chart, the right contract, a defined entry and invalidation, an instrument that fits the trade, and a plan for what happens once the position is live.
The four cases in this chapter put that entire process together: a Gold Futures setup, a Crude Oil Option trade, the same Gold view expressed through Futures and a Put, and finally a market move that is better left alone.
Case 1: Building A Gold Futures Trade
Suppose the US Dollar is strengthening and expectations around interest rates are putting pressure on Gold. That gives us a reason to investigate the bearish side, but the news alone is not enough to place a trade. We still need the chart to give us a workable entry.
Gold Mini is trading around ₹1,48,200, below a resistance area around ₹1,49,000–₹1,49,350. Rather than selling after price has already moved lower, the plan is to wait for a pullback into that area and look for bearish rejection.
If that confirmation appears, the illustrative trade becomes:
Instrument: Gold Mini Futures
Direction: Sell
Entry: Around ₹1,49,000
Stop Loss: ₹1,50,200
Target: ₹1,47,000
Quantity: 1 lot / 100 grams
With Gold Mini quoted per 10 grams, a 100-gram lot represents ₹10 for every one-point move. The 1,200-point distance to the Stop Loss therefore creates approximately ₹12,000 of planned gross risk, while the 2,000-point move to the target represents ₹20,000 of potential gross profit before costs and slippage.
But the trade still does not exist until the entry condition appears.
If Gold falls directly from ₹1,48,200 without giving the planned pullback, chasing the move would mean entering a different trade from the one we structured. If price instead pushes through the resistance area and invalidates the bearish setup before entry, the original view needs to be reassessed rather than defended.
If the rejection does appear, the next steps are practical. Select the relevant Gold Mini Futures contract on SAHI, check its expiry and live margin, confirm the quantity and choose the order type that matches the entry condition. The Stop Loss and target should already be decided before the order is sent.
Once the position is open, the market may move towards the target, towards the Stop Loss or nowhere useful at all. What matters then is managing the position against the plan rather than changing the plan around every move.
Case 2: A Crude Oil View Through An Option
Now consider Crude Oil Mini trading around 8,350 ahead of an important OPEC+ meeting. The market expects a possible production cut, while Crude continues to hold above an important support area. That gives us a bullish view, but the event also creates the possibility of a sharp move in either direction.
A Futures position would give direct exposure to Crude, but a sudden gap against the position could lead to an exit away from the intended Stop Loss. A purchased Call offers a different structure because the premium paid defines the maximum premium at risk on the standalone long Option.
Suppose we choose an illustrative out-of-the-money 8,500 Call with enough time remaining beyond the meeting. The premium is ₹320 per barrel and the contract multiplier is 10 barrels per lot, giving us a premium outlay of ₹3,200 per lot.
The maximum amount we are prepared to commit to the trade is ₹7,000. One lot would use ₹3,200, while three lots would require ₹9,600 and exceed the risk budget. Two lots require ₹6,400, so that becomes the position size.
The underlying Crude view remains valid while price holds above the support area, with 8,250 acting as the invalidation level. Before entering the trade, we also set a time exit. If Crude has not developed the expected follow-through within five trading days after the OPEC+ meeting, we will close the Call even if there is still time remaining before expiry.
On SAHI, that means selecting the correct expiry and strike, confirming that we are buying the Call rather than the Put, checking the live premium and entering the quantity. The ₹8,250 invalidation belongs to the underlying Crude price, so it cannot simply be copied into the Option ticket as a premium-based Stop Loss.
Suppose the meeting delivers roughly what the market expected. Because the expected production cut was already widely anticipated, the announcement itself does not create a lasting surprise. Crude initially jumps to around 8,650, taking the Call premium higher, but the move fails to hold and price later slips back towards 8,500.
As Crude gives back the initial move, the Call premium also falls. At the same time, some of the event uncertainty that supported the premium before the meeting has disappeared and time continues to pass.
Five trading days later, Crude has still not produced the sustained follow-through required by our time rule, so the Call is closed. Suppose it is now worth an illustrative ₹170 per barrel.
For two lots:
Exit value = ₹170 × 10 × 2 = ₹3,400
The original premium outlay was ₹6,400, so the trade closes with an illustrative gross loss of:
₹6,400 − ₹3,400 = ₹3,000
The bullish view did not need to be completely wrong for the Option trade to lose money. The move also needed to happen strongly enough and quickly enough for the premium to respond.
Case 3: Futures Or Options For The Same Gold View?
Return to the bearish Gold view from Case 1.
Instead of selling Gold Mini Futures, suppose we consider buying a Gold Mini Put. The underlying opinion has not changed. Gold is still expected to fall. What changes is the instrument carrying that view.
The Futures route requires roughly ₹1.34 lakh in margin for the illustrative one-lot position. The planned loss to the Stop Loss is around ₹12,000, although a sharp gap can result in an exit away from the intended level.
Now consider an illustrative Gold Mini Put with a premium of ₹1,400 per 10 grams. One 100-gram lot requires:
₹1,400 × 10 = ₹14,000
The Put therefore requires much less upfront capital than the Futures position, while the premium paid defines the maximum premium loss on the standalone long Option.
That does not make the Put automatically safer or better.
The Futures position responds directly to movements in the Futures price. If Gold falls 500 points, the short Futures position benefits from that movement point for point according to the contract value.
The Put behaves differently. Its premium responds to the Gold price, but also to time remaining and volatility. Gold can therefore move lower without producing the premium increase you expected if the move is too small, takes too long or other factors work against the Option.
Futures also bring leverage, margin requirements and the possibility that a gap causes a loss larger than the amount originally planned at the stop. The Put caps the premium at risk, but time works against the buyer as expiry approaches.
Neither instrument wins the comparison in every situation.
The better fit depends on the move you expect, how quickly you expect it, the capital available, the amount you are prepared to lose and how you intend to manage the position.
Case 4: The Trade You Should Not Take
Now imagine Gold jumps sharply after an unexpected geopolitical headline.
By the time you see the move, price is already far from the level where the original setup made sense. Candles have expanded, volatility is elevated and a meaningful Stop Loss would now have to sit much farther away.
There is plenty happening on the screen. That does not mean there is still a good trade available.
Suppose the nearest sensible target now offers too little additional reward relative to the distance required for a meaningful stop. Tightening the Stop Loss simply to improve the risk/reward calculation would put it at a level that says very little about whether the market view has actually failed.
Changing instruments does not repair the setup either. Buying a cheap Option with very little time remaining simply because the Futures position now looks too expensive can replace one poor trade with another.
The decision is to stay out.
That does not mean the original market move was untradeable. It means the opportunity available to you now no longer offers the structure required for a sensible trade.
There will be another Gold move, another inventory release, another OPEC meeting and another chart. Knowing how to place a trade does not create an obligation to participate in every one of them.
The Complete Trade Check
The four cases look different, but the process behind them is remarkably similar.
A trade begins with the market. What is moving the commodity, and does the chart support the view?
Then comes the contract. Which Futures or Option contract are you actually trading? What is its expiry, lot size and relevant capital requirement?
The trade itself needs an entry, an invalidation level and an exit framework. Only after that does the choice between Futures and Options become useful, because the instrument has to fit the expected move, time horizon, available capital and amount you are prepared to lose.
Execution introduces another round of checks around quantity, margin or premium and order type. Once the trade is live, the focus moves towards managing the position according to the plan rather than improvising around every move in P&L.
SAHI’s brokerage calculator estimates brokerage, CTT, exchange fees, stamp duty and GST for an MCX trade before the order is placed.
Expiry matters before the end as well. If a derivative is being carried forward, you need to know its last trading date and what settlement, exercise or delivery obligations may follow.
And after all of those questions, the answer can still be Wait or No Trade.
That is the full process: understand the commodity, build the view, choose the instrument, structure the risk, execute carefully, manage what happens afterwards and recognise when the conditions are not good enough to trade at all.
Key Takeaways
- A commodity view becomes a trade only after the entry, instrument, quantity, risk and exit have been defined.
- Futures and Options can express the same market view but require different capital and behave differently once the position is open.
- A correct directional view does not guarantee a profitable Option trade because the size, speed and timing of the move also matter.
- A trade should be managed according to its original risk and exit framework rather than changed simply because the market has moved.
- Waiting or choosing not to trade is a valid outcome when the setup, risk, contract or available price no longer makes sense.
Final Word
You began this course by understanding what commodities are and what sits behind their prices. From there, we moved through the contracts, capital requirements, market drivers, risk, analysis, Futures and Options, execution, trade management and what happens as a position moves towards exit or expiry.
All of those pieces eventually meet in one decision.
Is there a trade here that is worth taking?
You do not need to predict every move. You need to recognise when the market gives you a reason to investigate, know what would prove the view wrong and understand what you are risking before the order goes through.
Sometimes that process produces a Futures trade. Sometimes an Option fits better. Sometimes the setup needs more time.
And sometimes the correct answer is simply no trade.
Test yourself
Five quick questions on Chapter 20: Putting It All Together
Commodity knowledge check
How well do you understand commodity markets?
Answer all five questions to check what you have picked up from this chapter. Each answer comes with a short explanation.